Hotel door locks maintenance
Several common methods of hotel door locks maintenance.
Any household products in order to extend its service life, then in daily life must be its maintenance. Big to the sofa table, small to a small cup, etc. are no exception. Similarly, our hotel door locks is the same, in order to maintain the appearance of the hotel door locks and extend the life of the hotel door locks, in the daily use of the process, should pay attention to hotel door locks maintenance.
First, the appearance of maintenance:
1, during the renovation of the house, please use plastic bags (not to bring their own plastic tape with a plastic surface contact with the lock) to seal the lock handle, panel and other exposed parts, so as not to lock the surface treatment layer Acid or alkaline materials and gas erosion caused by spots, blistering or even delamination phenomenon, seriously affecting the appearance of the quality of the lock. Some zinc alloy and copper locks, installed on the door for a long time will find a “spot”, this phenomenon does not belong to rust, but belongs to oxidation, if this happens, as long as the surface wax rub You can remove the spots.
2, the normal use, if dirt, dry cloth can be used to clear, do not use detergent and other chemicals scrub. Otherwise, will destroy the protective film of the exposed parts, causing fading. Do not use a damp cloth to wipe the lock body and handle, because some metal material locks will be rusty; alloy material lock will wear off the coating, loss of beautiful results.
Second, performance maintenance:
1, in the course of the use of regular (half a year or once a year) or in the key plug is not smooth, in the keyhole with some graphite powder (pencil powder) from the lubrication, do not add any liquid oil Lubricant to avoid grease sticking to the spring, causing the lock to not turn and not open. When the door is closed more laborious, can be wiped in the oblique tongue pencil can be resolved.
2, closing the best holding the handle, the lock into the lock body, close the door and then let go, do not force hit the door, otherwise it will reduce the life of the lock.
3, when the main lock or insurance lock out of the door, do not violent impact, so as not to damage the tongue and the door frame.
Because the door and the door frame between the installed seal has a stretch effect, so when using the handle or key to unlock the tight, you can open the door at the same time by hand to push the door or sliding door to overcome the elasticity, do not turn the handle or key to open the door, So as not to break the handle or key.
Third, other maintenance:
1, the mechanical key must be properly kept.
2, regularly send a “time card” (every two months) to maintain a door lock.
3, the circuit board, the lock body can not rain. Water, because the structure is fine, will lead to inflexible or damaged.
4, in order to ensure the security of the system database, the system operator should regularly backup the system database files.